2 transmission variants are listed for the 2018 Cadillac Escalade ESV. Compare attributes, check the tag on your unit, and find the one that fits.
More than one variant is listed. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
These variants share the same listed attributes, so the attribute block does not separate them. The tag on your unit — and the interchange tag IDs listed with each variant — is how you tell them apart.
10L80 Automatic Transmission Assembly
| Bell Housing | Half Round Starter |
|---|---|
| Bell Housing Included | Yes |
| Bell Housing Type | Triangular Bell: 8 O'clock Round starter |
| Bellhousing Bolt Quantity | 18 |
| Casing Color | Gray |
| Connector Type | Internal T87A TCM |
| Dyno Tested | No |
| Extended Warranty | Yes |
| Flex Plate Included | No |
| Fluid Type | Dexron ULV |
| Forward Shift Position Quantity | 10 |
| Grade Type | Standard Replacement |
| Lock Up | Yes |
| Output Shaft Yoke Type | 32 Spline Slip |
| Pan Mounting Hole Quantity | 16 |
| Premium Labor | Yes |
| Pressure Control Switch | On the case |
| Pressure Switch In Case | Yes |
| Pressure Switch Included | No |
| Radiator Included | No |
| Remove And Replace Time | 8 |
| Reverse Shift Position Quantity | 1 |
| Sensor Type | Hall-Effect |
| Shift Type | Cable |
| Speedometer Type | Electronic |
| Throttle Cable | No |
| Throttle Cable Included | No |
| Torque Converter Included | Yes |
| Transfer Case Assembly Included | No |
| Transmission Extension Housing Included | Yes |
| Transmission External Cooler Included | No |
| Transmission Fluid Capacity | 12 Qt |
| Transmission Fluid Included | No |
| Transmission Fluid Type | DEXRON ULV ATF |
| Transmission Manufacturer Code | 10L80 |
| Transmission Speeds | 10 |
None listed.
None listed.
10L80 Automatic Transmission Assembly
| Bell Housing | Half Round Starter |
|---|---|
| Bell Housing Included | Yes |
| Bell Housing Type | Triangular Bell: 8 O'clock Round starter |
| Bellhousing Bolt Quantity | 18 |
| Casing Color | Gray |
| Connector Type | Internal T87A TCM |
| Dyno Tested | No |
| Extended Warranty | Yes |
| Flex Plate Included | No |
| Fluid Type | Dexron ULV |
| Forward Shift Position Quantity | 10 |
| Grade Type | Standard Replacement |
| Lock Up | Yes |
| Pan Mounting Hole Quantity | 16 |
| Premium Labor | Yes |
| Pressure Control Switch | On the case |
| Pressure Switch In Case | Yes |
| Pressure Switch Included | No |
| Radiator Included | No |
| Remove And Replace Time | 8 |
| Reverse Shift Position Quantity | 1 |
| Sensor Type | Hall-Effect |
| Shift Type | Cable |
| Speedometer Type | Electronic |
| Throttle Cable | No |
| Throttle Cable Included | No |
| Torque Converter Included | Yes |
| Transfer Case Assembly Included | No |
| Transmission Extension Housing Included | Yes |
| Transmission External Cooler Included | No |
| Transmission Fluid Capacity | 12 Qt |
| Transmission Fluid Included | No |
| Transmission Fluid Type | DEXRON ULV ATF |
| Transmission Manufacturer Code | 10L80 |
| Transmission Speeds | 10 |
None listed.
None listed.
2 variants are listed: T282702, T282703. Which one fits depends on the tag on your unit.
Check the tag on your unit before ordering. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
The listed attributes are the same across variants, so the tag on your unit and the interchange tag IDs are how you tell them apart.
Fitment data from the ETE catalog, our own completed orders, and Hollander interchange data. Numbering systems are listed separately and never merged. When a record lists more than one variant, the tag on your unit is the final word on fitment.