2 transmission variants are listed for the 2014 Nissan Quest. Compare attributes, check the tag on your unit, and find the one that fits.
More than one variant is listed. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
The attributes below differ between variants. Find the matching value on your unit's tag or in your vehicle's records.
CVT Automatic Transmission Assembly
| Average R&R | 11.3 |
|---|---|
| Bell Housing Included | Yes |
| Cooler Included | No |
| Cooler Replacement Required | No |
| Extended Warranty | No |
| Fluid Included | Yes |
| Fluid Type | 999MP-NS200P |
| Pan Bolts | 15 |
| Premium Labor | Yes |
| Radiator Included | No |
| Radiator Replacement Required | No |
| Tail Housing | N/A |
| Torque Converter Included | Yes |
| Transmission Family | CVT |
| Transmission Fluid | 9 |
None listed.
None listed.
CVT Automatic Transmission Assembly
| Average R&R | 10.5 |
|---|---|
| Bell Housing Included | Yes |
| Bell Housing Type | Integrated |
| California Proposition 65 | Yes |
| Cooler Included | Yes |
| Cooler Replacement Required | Yes |
| Extended Warranty | No |
| Flex Plate with Unit | Yes |
| Fluid Included | Yes |
| Fluid Type | 999MP-NS300P |
| Gasket or Seal Included | Yes |
| Grade Type | Standard Replacement |
| Lockup | Yes |
| Output Shaft Yoke | No |
| Pan Bolts | 19 |
| Premium Labor | Yes |
| Pressure Control Switch | No |
| Radiator Included | No |
| Radiator Replacement Required | No |
| Return Cooler Bypass Filter Included | Yes |
| Tail Housing Included | No |
| Thermal Bypass Valve Included | No |
| Throttle Cable Included | No |
| Torque Converter Included | Yes |
| Transfer Case Assembly Included | No |
| Transmission Family | CVT |
| Transmission Fluid Capacity | 9.3 |
| Yoke Style | No Yoke |
None listed.
None listed.
2 variants are listed: T163409, T163451. Which one fits depends on the tag on your unit.
Check the tag on your unit before ordering. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
The attributes that differ between variants are: Average R&R, Cooler Included, Cooler Replacement Required, Fluid Type, Pan Bolts.
Fitment data from the ETE catalog, our own completed orders, and Hollander interchange data. Numbering systems are listed separately and never merged. When a record lists more than one variant, the tag on your unit is the final word on fitment.