2 transmission variants are listed for the 2007 Chrysler Crossfire. Compare attributes, check the tag on your unit, and find the one that fits.
More than one variant is listed. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
The attributes below differ between variants. Find the matching value on your unit's tag or in your vehicle's records.
NSG370 Manual Transmission Assembly
| Bell Housing | Integral Bell Housing |
|---|---|
| Brackets Included | No |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm |
| Case Type | Front And Rear Cases |
| Dyno Tested | Yes |
| Fluid Type | Synchromech - MS-9224 |
| Gaskets Included | No |
| Output Type | RWD |
| Shifter Included | No |
| Switches Included | No |
| Transmission Family | NSG370 |
| Transmission Speeds | 6-Speed |
None listed.
722.6 Automatic Transmission Assembly
| Average R&R | 3.2 |
|---|---|
| Bell Housing | Rounded Top Bell Housing |
| Bell Housing Included | Yes |
| Connector Type | Big Round Connector Below Bell Passenger Side |
| Cooler Included | No |
| Cooler Replacement Required | No |
| Extended Warranty | No |
| Extension Housing | 4 Bolt Rear Mount - RWD |
| Fluid Type | PZL-ATF+4 |
| Lockup | Yes |
| Output Type | 3 Bolt Tri-Yoke |
| Pan Bolts | 6 |
| Premium Labor | Yes |
| ProductVideoURL | https://etereman.wistia.com/medias/v5zwgifdi4 |
| Radiator Included | No |
| Radiator Replacement Required | No |
| Shift Type | Shift Lever 4 Inch Long with Bend at the Tip, Without Interlock Cable |
| Starter | Small Pockets at 3 and 9 O'clock |
| Tail Housing | N/A |
| Torque Converter Included | Yes |
| Transmission Family | 722.6 |
| Transmission Fluid | 8 |
| Transmission Speeds | 5-Speed |
None listed.
2 variants are listed: M150224, T380601. Which one fits depends on the tag on your unit.
Check the tag on your unit before ordering. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
The attributes that differ between variants are: Bell Housing, Fluid Type, Output Type, Transmission Family, Transmission Speeds.
Fitment data from the ETE catalog, our own completed orders, and Hollander interchange data. Numbering systems are listed separately and never merged. When a record lists more than one variant, the tag on your unit is the final word on fitment.