3 transmission variants are listed for the 2005 Toyota Celica. Compare attributes, check the tag on your unit, and find the one that fits.
More than one variant is listed. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
The attributes below differ between variants. Find the matching value on your unit's tag or in your vehicle's records.
C56 Manual Transmission Assembly
| Brackets Included | No |
|---|---|
| California Proposition 65 | WARNING: Cancer and Reproductive Harm |
| Fluid Type | Toyota OEM Fluid |
| Gaskets Included | No |
| Output Type | FWD |
| Shifter Included | No |
| Switches Included | No |
| Transmission Family | C56 |
| Transmission Speeds | 5-Speed |
None listed.
None listed.
None listed.
U240E Automatic Transmission Assembly
| Average R&R | 7.6 |
|---|---|
| Bell Housing Included | Yes |
| Connector Type | 10 Flat Spades |
| Cooler Included | No |
| Cooler Lines | Right Side of Bell, Angled Up |
| Cooler Replacement Required | No |
| Extended Warranty | No |
| Fluid Type | PZL-HIGHMG |
| Neutral Safety Switch | 2 Bosses Opposing Shift Shaft |
| Premium Labor | Yes |
| Radiator Included | No |
| Radiator Replacement Required | No |
| Speedometer Type | With Hole Above Axle |
| Starter | 2 O'clock Starter Pocket |
| Tail Housing | N/A |
| Torque Converter Included | Yes |
None listed.
None listed.
None listed.
U341E Automatic Transmission Assembly
| Average R&R | 7.6 |
|---|---|
| Bell Housing Included | Yes |
| Cooler Included | No |
| Cooler Replacement Required | No |
| Extended Warranty | No |
| Fluid Type | PZL-LVMULTI |
| Premium Labor | Yes |
| Radiator Included | No |
| Radiator Replacement Required | No |
| Tail Housing | N/A |
| Torque Converter Included | Yes |
None listed.
None listed.
3 variants are listed: M150344, T501301, T509701. Which one fits depends on the tag on your unit.
Check the tag on your unit before ordering. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
The attributes that differ between variants are: Fluid Type.
Fitment data from the ETE catalog, our own completed orders, and Hollander interchange data. Numbering systems are listed separately and never merged. When a record lists more than one variant, the tag on your unit is the final word on fitment.