3 transmission variants are listed for the 2005 Jeep Wrangler. Compare attributes, check the tag on your unit, and find the one that fits.
More than one variant is listed. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
The attributes below differ between variants. Find the matching value on your unit's tag or in your vehicle's records.
NSG370 Manual Transmission Assembly
In our own completed orders for this vehicle and part, M150218 appeared in 6 of 18 orders (33.3%).
| Bell Housing | Integral Bell Housing |
|---|---|
| Brackets Included | No |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm |
| Case Type | Front And Rear Cases |
| Dyno Tested | Yes |
| Fluid Type | Synchromech - MS-9224 |
| Gaskets Included | No |
| Output Type | 4WD |
| Shifter Included | No |
| Switches Included | No |
| Transmission Family | NSG370 |
| Transmission Speeds | 6-Speed |
None listed.
Manual Transmission Assembly
| Bell Housing Included | Integral Bell Housing |
|---|---|
| Brackets Included | No |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm |
| Dyno Tested | Yes |
| External Cooler Included | No |
| Flex Plate with Unit | No |
| Fluid Included | No |
| Fluid Type | Synchromech - MS-9224 |
| Gaskets Included | No |
| Grade Type | Standard Replacement |
| Lockup | No |
| Output Type | 4WD |
| Premium Labor | Yes |
| Radiator Included | No |
| Shifter Included | No |
| Switches Included | No |
| Tail Housing Included | Yes |
| Throttle Cable Included | No |
| Torque Converter Included | No |
| Transfer Case Assembly Included | No |
| Transmission Family | NSG370 |
| Transmission Fluid Capacity | 0 |
| Transmission Speeds | 6-Speed |
None listed.
None listed.
42RLE Automatic Transmission Assembly
In our own completed orders for this vehicle and part, T151211 appeared in 9 of 18 orders (50%).
| Average R&R | 4.8 |
|---|---|
| Bell Housing Included | Yes |
| Case Type | With Crank Sensor Hole in Bell Housing |
| Connector Type | On Each Side of Unit |
| Cooler Included | No |
| Cooler Replacement Required | No |
| Extended Warranty | No |
| Fluid Type | PZL-ATF+4 |
| Lockup | Yes |
| Pan Bolts | 13 |
| Premium Labor | Yes |
| ProductVideoURL | https://etereman.wistia.com/medias/v5zwgifdi4 |
| Radiator Included | No |
| Radiator Replacement Required | No |
| Starter | Starter Pocket 8 O'clock / 2 Bolt |
| Tail Housing | Without |
| Torque Converter Included | Yes |
| Transmission Family | 42RLE |
| Transmission Fluid | 9 |
| Transmission Speeds | 4-Speed |
None listed.
3 variants are listed: M150218, M150337, T151211. Which one fits depends on the tag on your unit.
Check the tag on your unit before ordering. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
The attributes that differ between variants are: Bell Housing Included, Case Type, Fluid Type, Lockup, Torque Converter Included, Transmission Family, Transmission Speeds.
T151211 appeared in 9 of 18 completed orders (50%).
Fitment data from the ETE catalog, our own completed orders, and Hollander interchange data. Numbering systems are listed separately and never merged. When a record lists more than one variant, the tag on your unit is the final word on fitment.