2 transmission variants are listed for the 1998 Ford Windstar. Compare attributes, check the tag on your unit, and find the one that fits.
More than one variant is listed. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
The attributes below differ between variants. Find the matching value on your unit's tag or in your vehicle's records.
AX4S Automatic Transmission Assembly
| Average R&R | 7.2 |
|---|---|
| Bell Housing Included | Yes |
| Connector Type | 9 Pins on Top |
| Cooler Included | No |
| Cooler Replacement Required | No |
| Covers | Steel with No Boss Mount |
| Extended Warranty | No |
| Fluid Type | PZL-HIGHMG |
| Lockup | Yes |
| Pan Bolts | 17 |
| Premium Labor | Yes |
| ProductVideoURL | https://etereman.wistia.com/medias/v5zwgifdi4 |
| Radiator Included | No |
| Radiator Replacement Required | No |
| Sensor Type | Without Output Speed Sensor |
| Speedometer Type | With Hole in Case |
| Tail Housing | N/A |
| Torque Converter Included | Yes |
| Transmission Family | AX4S |
| Transmission Fluid | 12 |
| Transmission Speeds | 4-Speed |
None listed.
AX4S Automatic Transmission Assembly
| Average R&R | 7.3 |
|---|---|
| Bell Housing Included | Yes |
| Connector Type | 9 Pins on Top |
| Cooler Included | No |
| Cooler Replacement Required | No |
| Covers | Steel with No Boss Mount |
| Extended Warranty | No |
| Fluid Type | PZL-HIGHMG |
| Lockup | Yes |
| Pan Bolts | 17 |
| Premium Labor | Yes |
| ProductVideoURL | https://etereman.wistia.com/medias/v5zwgifdi4 |
| Radiator Included | No |
| Radiator Replacement Required | No |
| Sensor Type | Without Output Speed Sensor |
| Speedometer Type | With Hole in Case |
| Tail Housing | N/A |
| Torque Converter Included | Yes |
| Transmission Family | AX4S |
| Transmission Fluid | 12 |
| Transmission Speeds | 4-Speed |
None listed.
2 variants are listed: T161517, T161519. Which one fits depends on the tag on your unit.
Check the tag on your unit before ordering. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
The attributes that differ between variants are: Average R&R.
Fitment data from the ETE catalog, our own completed orders, and Hollander interchange data. Numbering systems are listed separately and never merged. When a record lists more than one variant, the tag on your unit is the final word on fitment.