2 transmission variants are listed for the 1990 Dodge Dynasty. Compare attributes, check the tag on your unit, and find the one that fits.
More than one variant is listed. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
The attributes below differ between variants. Find the matching value on your unit's tag or in your vehicle's records.
A404 Automatic Transmission Assembly
| Average R&R | 5.2 |
|---|---|
| Bell Housing Included | Yes |
| Cooler Included | No |
| Cooler Replacement Required | No |
| Extended Warranty | No |
| Fluid Type | PZL-ATF+4 |
| Lockup | Yes |
| Pan Bolts | 14 |
| Premium Labor | Yes |
| ProductVideoURL | https://etereman.wistia.com/medias/v5zwgifdi4 |
| Radiator Included | No |
| Radiator Replacement Required | No |
| Tail Housing | With |
| Torque Converter Included | Yes |
| Transmission Family | A404 |
| Transmission Fluid | 9 |
| Transmission Speeds | 3-Speed |
None listed.
A604 Automatic Transmission Assembly
| Average R&R | 5.5 |
|---|---|
| Bell Housing | With Bolt Hole at 12 O'clock Position |
| Bell Housing Included | Yes |
| Case Castings | 013, 761 |
| Cooler Included | No |
| Cooler Replacement Required | No |
| Extended Warranty | No |
| Extension Housing | 4 Inch with Speedo Hole |
| Fluid Type | PZL-ATF+4 |
| Lockup | Yes |
| Pan Bolts | 14 |
| Premium Labor | Yes |
| ProductVideoURL | https://etereman.wistia.com/medias/v5zwgifdi4 |
| Radiator Included | No |
| Radiator Replacement Required | No |
| Sensor Type | Separate Transmission Range Sensor, With Crank Position Sensor |
| Tail Housing | With |
| Torque Converter Included | Yes |
| Transmission Family | A604 |
| Transmission Fluid | 9 |
| Transmission Speeds | 4-Speed |
None listed.
2 variants are listed: T150707, T150856. Which one fits depends on the tag on your unit.
Check the tag on your unit before ordering. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
The attributes that differ between variants are: Average R&R, Transmission Family, Transmission Speeds.
Fitment data from the ETE catalog, our own completed orders, and Hollander interchange data. Numbering systems are listed separately and never merged. When a record lists more than one variant, the tag on your unit is the final word on fitment.