1989 Ford Bronco II Transmission — Variants, Fitment & Tag Check

5 transmission variants are listed for the 1989 Ford Bronco II. Compare attributes, check the tag on your unit, and find the one that fits.

More than one variant is listed. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.

What tells the variants apart

The attributes below differ between variants. Find the matching value on your unit's tag or in your vehicle's records.

Variant M150171

R1 Manual Transmission Assembly

Illustrative photo of M150171
Illustrative images — not the exact unit listed
Bottom PanNo Bottom Pan
Brackets IncludedNo
California Proposition 65WARNING: Cancer and Reproductive Harm
Fluid TypeATF
Gaskets IncludedNo
Output TypeRWD
ShifterShift Lever Bolts Into The Top Cover
Shifter IncludedNo
Speedometer Type8 Tooth Speedometer Drive Gear
Switches IncludedNo
Transmission FamilyR1
Transmission Speeds5-Speed

Interchange numbers (vendor)

OEM cross-references

None listed.

Hollander numbers

Variant M150172

R1 Manual Transmission Assembly

Illustrative photo of M150172
Illustrative images — not the exact unit listed
Bottom PanNo Bottom Pan
Brackets IncludedNo
California Proposition 65WARNING: Cancer and Reproductive Harm
Fluid TypeATF
Gaskets IncludedNo
Output TypeRWD
ShifterShift Lever Bolts Into The Top Cover
Shifter IncludedNo
Speedometer Type6 Tooth Speedometer Drive Gear
Switches IncludedNo
Transmission FamilyR1
Transmission Speeds5-Speed

Interchange numbers (vendor)

OEM cross-references

None listed.

Hollander numbers

Variant M150173

R1 Manual Transmission Assembly

Illustrative photo of M150173
Illustrative images — not the exact unit listed
Bottom PanNo Bottom Pan
Brackets IncludedNo
California Proposition 65WARNING: Cancer and Reproductive Harm
CoversOne Switch Top Cover
Fluid TypeATF
Gaskets IncludedNo
Output TypeRWD
ShifterShift Lever Bolts Into The Top Cover
Shifter IncludedNo
Speedometer Type7 Tooth Speedometer Drive Gear
Switches IncludedNo
Transmission FamilyR1
Transmission Speeds5-Speed

Interchange numbers (vendor)

OEM cross-references

None listed.

Hollander numbers

Variant M150174

R1 Manual Transmission Assembly

Illustrative photo of M150174 Illustrative photo of M150174 Illustrative photo of M150174 Illustrative photo of M150174
Illustrative images — not the exact unit listed
Brackets IncludedNo
California Proposition 65WARNING: Cancer and Reproductive Harm
CoversTwo Switch Top Cover
Fluid TypeATF
Gaskets IncludedNo
Output Type4WD
ShifterShift Lever Bolts Into The Top Cover
Shifter IncludedNo
Switches IncludedNo
Transmission FamilyR1
Transmission Speeds5-Speed

Interchange numbers (vendor)

OEM cross-references

None listed.

Hollander numbers

Variant T161015

A4LD Automatic Transmission Assembly

Illustrative photo of T161015 Illustrative photo of T161015 Illustrative photo of T161015 Illustrative photo of T161015
Illustrative images — not the exact unit listed
Average R&R5.2
Bell Housing IncludedYes
Connector Type3 Pins
Cooler IncludedNo
Cooler Lines3/8 Inch
Cooler Replacement RequiredNo
Extended WarrantyNo
Fluid TypePZL-HIGHMG
Premium LaborYes
Radiator IncludedNo
Radiator Replacement RequiredNo
Tail HousingN/A
Torque Converter IncludedYes

Interchange numbers (vendor)

OEM cross-references

None listed.

Hollander numbers

Frequently asked questions

What transmission fits a 1989 Ford Bronco II?

5 variants are listed: M150171, M150172, M150173, M150174, T161015. Which one fits depends on the tag on your unit.

How do I know which variant fits my 1989 Ford Bronco II?

Check the tag on your unit before ordering. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.

What tells the transmission variants apart for a 1989 Ford Bronco II?

The attributes that differ between variants are: Covers, Fluid Type, Output Type, Speedometer Type.

Fitment data from the ETE catalog, our own completed orders, and Hollander interchange data. Numbering systems are listed separately and never merged. When a record lists more than one variant, the tag on your unit is the final word on fitment.