2 transmission variants are listed for the 1987 Jeep Comanche. Compare attributes, check the tag on your unit, and find the one that fits.
More than one variant is listed. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
The attributes below differ between variants. Find the matching value on your unit's tag or in your vehicle's records.
AX5 Manual Transmission Assembly
| Brackets Included | No |
|---|---|
| California Proposition 65 | WARNING: Cancer and Reproductive Harm |
| Case Type | Aluminum Front And Rear Cases With Cast Iron Center Plate |
| Dyno Tested | Yes |
| Fluid Type | 10W30 Semi-Synthetic |
| Gaskets Included | No |
| Output Type | 4WD |
| Shifter Included | No |
| Slave Cylinder | Internal Slave Cylinder |
| Switches Included | No |
| Transmission Family | AX5 |
| Transmission Speeds | 5-Speed |
None listed.
None listed.
AX5 Manual Transmission Assembly
| Bell Housing Included | No |
|---|---|
| Brackets Included | No |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm |
| Case Type | Aluminum Front And Rear Cases With Cast Iron Center Plate |
| Dyno Tested | Yes |
| External Cooler Included | No |
| Flex Plate with Unit | No |
| Fluid Included | No |
| Fluid Type | ATF |
| Gaskets Included | No |
| Grade Type | Standard Replacement |
| Lockup | No |
| Output Type | RWD |
| Premium Labor | Yes |
| Radiator Included | No |
| Shifter Included | No |
| Slave Cylinder | Internal Slave Cylinder |
| Switches Included | No |
| Tail Housing Included | Yes |
| Throttle Cable Included | No |
| Torque Converter Included | No |
| Transfer Case Assembly Included | No |
| Transmission Family | AX5 |
| Transmission Fluid Capacity | 0 |
| Transmission Speeds | 5-Speed |
None listed.
None listed.
2 variants are listed: M150141, M150145. Which one fits depends on the tag on your unit.
Check the tag on your unit before ordering. Please verify the tag on your unit before ordering. A VIN shows the part your vehicle was built with, but if it has been replaced, the tag on the unit in your vehicle may be different, and the tag on your unit is what determines fitment.
The attributes that differ between variants are: Fluid Type, Output Type.
Fitment data from the ETE catalog, our own completed orders, and Hollander interchange data. Numbering systems are listed separately and never merged. When a record lists more than one variant, the tag on your unit is the final word on fitment.